![]() Look for part of the car’s frame, or chassis, you can clamp onto rather than any engine parts. Next, attach the black clamp to any heavy metal within the engine. Clamp the red cable from your portable charger to the positive terminal on the battery.Ĭaution: Again, remember not to touch the black and red clamps together. The negative terminal is typically black and will have a minus sign or letter "N" nearby. The positive terminal will likely be marked with a + sign or letter P and typically has a red post cap. Identify your positive and negative battery terminals. If you are using a unit that plugs into a wall, keep it unplugged at this point. Start by turning off the portable battery charger. ![]() If you do have a positive ground system, reverse the order of cables, attaching the black first and then the red. Also check whether you have a remote terminal built into the engine away from the battery that is used when jump starting the car.įor this tutorial, we will assume you’re working with a 12-volt, negative ground battery system. However, you may also be dealing with a 6-volt system, and some cars have a positive ground. A 12-volt, negative ground system is the most common. Step 2 - Check the Car Manualīefore you hook up a portable battery charger, make sure you understand the system you’re working with. Touching them to the wrong surface can result in a shock. Always watch the location of the red and black clamps as you work. Remove any dangling jewelry, pull back long hair, and roll up long sleeves or other loose clothing. You're dealing with electricity, so use caution. Once it's up and running, the engine will take the recharging from there. ![]() Note: Most portable battery chargers are not used to actually charge the battery, but to provide a burst of charge that allows you to start the car. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |